技术规格
MICROPHONE PICKUP PARAMETERS
Power Supply: DC5V/100mA ± 10mA
Frequency response: 20Hz-20KHz
Sensitivity: -40dB ± 3dB( at 1KHz)
Signal-to-noise ratio: 75dB
Maximum sound pressure level: 120dB (1kHz≤1%T.H.D)
Bit rate: 16bit-24bit
Sampling Rate: 48KHz
Total harmonic distortion: <0.1%
Pickup diaphragm chamber: 3 x 14mm
HEADPHONE OUTPUT PARAMETERS
Signal-to-noise ratio: 100dB
Frequency response: 20Hz-20KHz
Output power (RMS): 130mW
Total harmonic distortion: <0.1%
Power consumption: DC5V /100mA +/- 10mA
Impedance: >16ohms
I finally bought this one and the difference was huge! I sound crystal clear and professional. Minimal background noise as long as I set the sensitivity to low. I don't even have to be super close to the mic and it picks up my voice on the lowest sensitivity setting.
I did run into an issue where I would hear a buzzing noise during playback but I realized when I plug the USB around other cords, it picks up the internal sound of the other cords. So I plugged this in away from the other cords and the buzzing noise went away. This issue is likely my setup and not the mic itself, but if this is happening to you, then that's probably why.
Overall, I'm so in love with this mic that I can't stop recording myself and talking to people. It sparks my creativity!